Delete the Azure Network Watcher Flow Log.


Azure > Network Watcher > Flow Log

Azure > Network Watcher > Flow Log > Delete

Process events for Azure Network Watcher service Flow Log resources.

The router receives events from the event handler and creates, updates, or deletes Flow Log resources in the CMDB.


Azure > Resource Group

Azure > Network Watcher > Flow Log > Router

Update retention policy for Azure flow log.

Azure > Network Watcher > Flow Log > Update Retention Policy

Delete the Azure Network Watcher Network Watcher.


Azure > Network Watcher > Network Watcher

Azure > Network Watcher > Network Watcher > Delete

Process events for Azure Network Watcher service Network Watcher resources.

The router receives events from the event handler and creates, updates, or deletes Network Watcher resources in the CMDB.


Azure > Network Watcher > Network Watcher > Router

Update the tags for Azure Network Watcher network watcher.


Azure > Network Watcher > Network Watcher > Set Tags

Take an action when an Azure Network Watcher flow log is not active based on the&#92;n`Azure &gt; Network Watcher &gt; Flow Log &gt; Active &gt; * policies`.&#92;n&#92;nThe Active control determines whether the resource is in active use, and if not, has&#92;nthe ability to delete / cleanup the resource. When running an automated compliance&#92;nenvironment, it&#39;s common to end up with a wide range of alarms that are difficult&#92;nand time consuming to clear. The Active control brings automated, well-defined&#92;ncontrol to this process.&#92;n&#92;nThe Active control checks the status of all defined Active policies for the&#92;nresource (`Azure &gt; Network Watcher &gt; Flow Log &gt; Active &gt; *`),&#92;nraises an alarm, and takes the defined enforcement action. Each Active&#92;nsub-policy can calculate a status of active, inactive or skipped. Generally,&#92;nif the resource appears to be Active for any reason it will be considered Active.&#92;n&#92;n**Note:** In contrast with Approved, where if the resource appears to be Unapproved&#92;nfor any reason it will be considered Unapproved.&#92;n&#92;nSee [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active) for more information.&#92;n

Azure > Network Watcher > Flow Log > Active > Age

Azure > Network Watcher > Flow Log > Active > Last Modified

Azure > Network Watcher > Flow Log > Active

Take an action when an Azure Network Watcher flow log is not approved based on `Azure &gt; Network Watcher &gt; Flow Log &gt; Approved &gt; * policies`.&#92;n&#92;nThe Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.&#92;n&#92;nFor any enforcement actions that specify `if new`, e.g., `Enforce: Delete unapproved if new`, this control will only take the enforcement actions for resources created within the last 60 minutes.&#92;n&#92;nSee [Approved](https://turbot.com/guardrails/docs/concepts/guardrails/approved) for more information.&#92;n

Azure > Network Watcher > Flow Log > Approved > Custom

Azure > Network Watcher > Flow Log > Approved > Usage

Azure > Network Watcher > Enabled

Azure > Network Watcher > Flow Log > Approved

Record and synchronize details for the Azure Network Watcher flow log into the CMDB.&#92;n&#92;nThe [CMDB](https://turbot.com/guardrails/docs/concepts/guardrails/cmdb) control is&#92;nresponsible for populating and updating all the attributes for that&#92;nresource type in the Guardrails CMDB.&#92;n&#92;n**Note:** If CMDB is set to Skip for a resource, then it will not be added&#92;nto the CMDB, and no controls that target it will run.&#92;n

Azure > Network Watcher > Flow Log > CMDB

Discover all Azure Network Watcher flow log resources and add them to the CMDB.&#92;n&#92;nThe [Discovery](https://turbot.com/guardrails/docs/concepts/guardrails/discovery) control is responsible for finding resources of a specific type. It periodically searches for new resources and saves them to the CMDB. Once discovered, resources are then responsible for tracking changes to themselves through the [CMDB](https://turbot.com/guardrails/docs/concepts/guardrails/cmdb) control.&#92;n

Azure > Network Watcher > Flow Log > Discovery

Raise an alarm if the network security group (NSG) flow log retention policy is not configured to meet the defined policy requirements.&#92;n&#92;n**Note:** This check applies exclusively to flow logs using V2 storage accounts.&#92;n

Azure > Network Watcher > Flow Log > Retention Policy > Days

Azure > Network Watcher > Flow Log > Retention Policy

Take an action when an Azure Network Watcher network watcher is not active based on the&#92;n`Azure &gt; Network Watcher &gt; Network Watcher &gt; Active &gt; * policies`.&#92;n&#92;nThe Active control determines whether the resource is in active use, and if not, has&#92;nthe ability to delete / cleanup the resource. When running an automated compliance&#92;nenvironment, it&#39;s common to end up with a wide range of alarms that are difficult&#92;nand time consuming to clear. The Active control brings automated, well-defined&#92;ncontrol to this process.&#92;n&#92;nThe Active control checks the status of all defined Active policies for the&#92;nresource (`Azure &gt; Network Watcher &gt; Network Watcher &gt; Active &gt; *`),&#92;nraises an alarm, and takes the defined enforcement action. Each Active&#92;nsub-policy can calculate a status of active, inactive or skipped. Generally,&#92;nif the resource appears to be Active for any reason it will be considered Active.&#92;n&#92;n**Note:** In contrast with Approved, where if the resource appears to be Unapproved&#92;nfor any reason it will be considered Unapproved.&#92;n&#92;nSee [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active) for more information.&#92;n

Azure > Network Watcher > Network Watcher > Active > Age

Azure > Network Watcher > Network Watcher > Active > Last Modified

Azure > Network Watcher > Network Watcher > Active

Take an action when an Azure Network Watcher network watcher is not approved based on `Azure &gt; Network Watcher &gt; Network Watcher &gt; Approved &gt; * policies`.&#92;n&#92;nThe Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.&#92;n&#92;nFor any enforcement actions that specify `if new`, e.g., `Enforce: Delete unapproved if new`, this control will only take the enforcement actions for resources created within the last 60 minutes.&#92;n&#92;nSee [Approved](https://turbot.com/guardrails/docs/concepts/guardrails/approved) for more information.&#92;n

Azure > Network Watcher > Network Watcher > Approved > Custom

Azure > Network Watcher > Network Watcher > Approved > Usage

Azure > Network Watcher > Network Watcher > Approved > Regions

Azure > Network Watcher > Network Watcher > Approved

Record and synchronize details for the Azure Network Watcher network watcher into the CMDB.&#92;n&#92;nThe [CMDB](https://turbot.com/guardrails/docs/concepts/guardrails/cmdb) control is&#92;nresponsible for populating and updating all the attributes for that&#92;nresource type in the Guardrails CMDB.&#92;n&#92;n**Note:** If CMDB is set to Skip for a resource, then it will not be added&#92;nto the CMDB, and no controls that target it will run.&#92;n&#92;nCMDB controls also use the Regions policy associated with the resource. If&#92;nregion is not in `Azure &gt; Network Watcher &gt; Network Watcher &gt; Regions` policy, the CMDB control will delete the&#92;nresource from the CMDB.&#92;n

Azure > Network Watcher > Network Watcher > Regions

Azure > Network Watcher > Network Watcher > CMDB

Discover all Azure Network Watcher network watcher resources and add them to the CMDB.&#92;n&#92;nThe [Discovery](https://turbot.com/guardrails/docs/concepts/guardrails/discovery) control is responsible for finding resources of a specific type. It periodically searches for new resources and saves them to the CMDB. Once discovered, resources are then responsible for tracking changes to themselves through the [CMDB](https://turbot.com/guardrails/docs/concepts/guardrails/cmdb) control.&#92;n&#92;n**Note:** Discovery and CMDB controls also use the Regions policy associated with the resource. If the region is not in `Azure &gt; Network Watcher &gt; Network Watcher &gt; Regions` policy, the CMDB control will delete the resource from the CMDB.&#92;n

Azure > Network Watcher > Network Watcher > Discovery

Take an action when an Azure Network Watcher network watcher tags is not updated based on the `Azure &gt; Network Watcher &gt; Network Watcher &gt; Tags &gt; *` policies.&#92;n&#92;nIf the resource is not updated with the tags defined in `Azure &gt; Network Watcher &gt; Network Watcher &gt; Tags &gt; Template`, this control raises an alarm and takes the defined enforcement action.&#92;n&#92;nSee [Tags](https://turbot.com/guardrails/docs/concepts/guardrails/tagging) for more information.&#92;n

Azure > Network Watcher > Network Watcher > Tags > Template

Azure > Network Watcher > Network Watcher > Tags

Microsoft.NetworkNetworkWatcherRGTestVM1-nsg

NetworkWatcher_northeurope

flowLog

flowLogAka

flowLogId

flowLogProperties

flowLogServiceNow

networkWatcher

networkWatcherAka

networkWatcherId

networkWatcherName

networkWatcherService

networkWatcherServiceAka

networkWatcherServiceNow

targetResourceId

azure-networkwatcher

A calculated policy that Guardrails uses to create a compiled list of ALL&#92;npermissions for Azure Network Watcher that is used as input to the control that manages&#92;nthe IAM stack.&#92;n

Azure > Turbot > Permissions > Compiled > Service Permissions

Azure > Subscription

Azure > Turbot > Permissions > Compiled > Service Permissions > @turbot/azure-networkwatcher

A calculated policy that Guardrails uses to create a compiled list of ALL&#92;npermission levels for Azure Network Watcher that is used as input to the&#92;nstack that manages the Guardrails IAM permissions objects.&#92;n

Azure > Turbot > Permissions > Compiled > Levels

Azure > Turbot > Permissions > Compiled > Levels > @turbot/azure-networkwatcher

Determine the action to take when an Azure Network Watcher flow log, based on the `Azure &gt; Network Watcher &gt; Flow Log &gt; Active &gt; *` policies.&#92;n&#92;nThe control determines whether the resource is in active use, and if not,&#92;nhas the ability to delete / cleanup the resource. When running an automated&#92;ncompliance environment, it&#39;s common to end up with a wide range of alarms&#92;nthat are difficult and time consuming to clear. The Active control brings&#92;nautomated, well-defined control to this process.&#92;n&#92;nThe Active control checks the status of all defined Active policies for the&#92;nresource (`Azure &gt; Network Watcher &gt; Flow Log &gt; Active &gt; *`), raises an alarm, and takes the defined enforcement&#92;naction. Each Active sub-policy can calculate a status of active, inactive&#92;nor skipped. Generally, if the resource appears to be Active for any reason&#92;nit will be considered Active.&#92;n&#92;n**Note:** In contrast with Approved, where if the&#92;nresource appears to be Unapproved for any reason it will be considered&#92;nUnapproved.&#92;n&#92;nSee [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active) for more information.&#92;n

The age after which the Azure Network Watcher flow log&#92;nis no longer considered active. If a create time is unavailable, the time Guardrails discovered the resource is used.&#92;n&#92;nThe [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active)&#92;ncontrol determines whether the resource is in active use, and if not, has&#92;nthe ability to delete / cleanup the resource. When running an automated&#92;ncompliance environment, it&#39;s common to end up with a wide range of alarms&#92;nthat are difficult and time consuming to clear. The Active control brings&#92;nautomated, well-defined control to this process.&#92;n&#92;nThe Active control checks the status of all defined Active policies for the&#92;nresource (`Azure &gt; Network Watcher &gt; Flow Log &gt; Active &gt; *`),&#92;nraises an alarm, and takes the defined enforcement action. Each Active&#92;nsub-policy can calculate a status of active, inactive or skipped. Generally,&#92;nif the resource appears to be Active for any reason it will be considered Active.&#92;n&#92;n**Note** In contrast with Approved, where if the resource appears to be Unapproved&#92;nfor any reason it will be considered Unapproved.&#92;n&#92;nSee [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active) for more information.&#92;n

The number of days since the Azure Network Watcher flow log was last modified before it is considered&#92;ninactive.&#92;n&#92;nThe [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active)&#92;ncontrol determines whether the resource is in active use, and if not, has&#92;nthe ability to delete / cleanup the resource. When running an automated&#92;ncompliance environment, it&#39;s common to end up with a wide range of alarms&#92;nthat are difficult and time consuming to clear. The Active control brings&#92;nautomated, well-defined control to this process.&#92;n&#92;nThe Active control checks the status of all defined Active policies for the&#92;nresource (`Azure &gt; Network Watcher &gt; Flow Log &gt; Active &gt; *`), raises an alarm, and takes the defined enforcement&#92;naction. Each Active sub-policy can calculate a status of active, inactive&#92;nor skipped. Generally, if the resource appears to be Active for any reason&#92;nit will be considered Active.&#92;n&#92;n**Note** In contrast with Approved, where if the&#92;nresource appears to be Unapproved for any reason it will be considered&#92;nUnapproved.&#92;n

Determine the action to take when an Azure Network Watcher flow log is not approved based on `Azure &gt; Network Watcher &gt; Flow Log &gt; Approved &gt; *` policies.&#92;n&#92;nThe Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.&#92;n&#92;nFor any enforcement actions that specify `if new`, e.g., `Enforce: Delete unapproved if new`, this control will only take the enforcement actions for resources created within the last 60 minutes.&#92;n&#92;nSee [Approved](https://turbot.com/guardrails/docs/concepts/guardrails/approved) for more information.&#92;n

azure_networkwatcher_flowlog_approved

Azure CIS v2.0.0 - Section 5 - Logging and Monitoring

Determine whether the Azure Network Watcher flow log is allowed to exist.&#92;nThis policy will be evaluated by the Approved control. If an Azure Network Watcher flow log is not approved, it will be subject to the action specified in the `Azure &gt; Network Watcher &gt; Flow Log &gt; Approved` policy.&#92;nSee [Approved](https://turbot.com/guardrails/docs/concepts/guardrails/approved) for more information.&#92;n&#92;n**Note**: The policy value must be a string with a value of `Approved`, `Not approved` or `Skip`, or in the form of YAML objects. The object(s) must contain the key `result` with its value as `Approved` or `Not approved`. A custom title and message can also be added using the keys `title` and `message` respectively.&#92;n

azure_networkwatcher_flowlog_approved_custom

string

Determine whether the Azure Network Watcher flow log is allowed to exist.&#92;n&#92;nThis policy will be evaluated by the Approved control. If an Azure Network Watcher flow log is not approved, it will be subject to the action specified in the `Azure &gt; Network Watcher &gt; Flow Log &gt; Approved` policy.&#92;n&#92;nSee [Approved](https://turbot.com/guardrails/docs/concepts/guardrails/approved) for more information.&#92;n

Configure whether to record and synchronize details for the Azure Network Watcher flow log into the CMDB.&#92;n&#92;nThe [CMDB](https://turbot.com/guardrails/docs/concepts/guardrails/cmdb) control is responsible for populating and updating all the attributes for that resource type in the Guardrails CMDB.&#92;nAll policies and controls in Guardrails are based around the resource, so usually the CMDB policy is set to **&quot;Enforce: Enabled&quot;**.&#92;n&#92;nIf set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.&#92;n&#92;nTo cleanup resources and stop tracking changes, set this policy to **&quot;Enforce: Disabled&quot;**.&#92;n

Raise an alarm if the network security group flow log retention policy is not configured to meet policy.&#92;n&#92;n**Note:** This check applies exclusively to flow logs using V2 storage accounts.&#92;n

azure_networkwatcher_flow_log_retention_policy

Azure CIS v2.0.0 - Section 6 - Networking

The number of days for which the flow logs are retained. Flow logs are deleted by Azure at the end of a retention period.&#92;n

azure_networkwatcher_flow_log_retention_policy_days

Determine the action to take when an Azure Network Watcher network watcher, based on the `Azure &gt; Network Watcher &gt; Network Watcher &gt; Active &gt; *` policies.&#92;n&#92;nThe control determines whether the resource is in active use, and if not,&#92;nhas the ability to delete / cleanup the resource. When running an automated&#92;ncompliance environment, it&#39;s common to end up with a wide range of alarms&#92;nthat are difficult and time consuming to clear. The Active control brings&#92;nautomated, well-defined control to this process.&#92;n&#92;nThe Active control checks the status of all defined Active policies for the&#92;nresource (`Azure &gt; Network Watcher &gt; Network Watcher &gt; Active &gt; *`), raises an alarm, and takes the defined enforcement&#92;naction. Each Active sub-policy can calculate a status of active, inactive&#92;nor skipped. Generally, if the resource appears to be Active for any reason&#92;nit will be considered Active.&#92;n&#92;n**Note:** In contrast with Approved, where if the&#92;nresource appears to be Unapproved for any reason it will be considered&#92;nUnapproved.&#92;n&#92;nSee [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active) for more information.&#92;n

The age after which the Azure Network Watcher network watcher&#92;nis no longer considered active. If a create time is unavailable, the time Guardrails discovered the resource is used.&#92;n&#92;nThe [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active)&#92;ncontrol determines whether the resource is in active use, and if not, has&#92;nthe ability to delete / cleanup the resource. When running an automated&#92;ncompliance environment, it&#39;s common to end up with a wide range of alarms&#92;nthat are difficult and time consuming to clear. The Active control brings&#92;nautomated, well-defined control to this process.&#92;n&#92;nThe Active control checks the status of all defined Active policies for the&#92;nresource (`Azure &gt; Network Watcher &gt; Network Watcher &gt; Active &gt; *`),&#92;nraises an alarm, and takes the defined enforcement action. Each Active&#92;nsub-policy can calculate a status of active, inactive or skipped. Generally,&#92;nif the resource appears to be Active for any reason it will be considered Active.&#92;n&#92;n**Note** In contrast with Approved, where if the resource appears to be Unapproved&#92;nfor any reason it will be considered Unapproved.&#92;n&#92;nSee [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active) for more information.&#92;n

The number of days since the Azure Network Watcher network watcher was last modified before it is considered&#92;ninactive.&#92;n&#92;nThe [Active](https://turbot.com/guardrails/docs/concepts/guardrails/active)&#92;ncontrol determines whether the resource is in active use, and if not, has&#92;nthe ability to delete / cleanup the resource. When running an automated&#92;ncompliance environment, it&#39;s common to end up with a wide range of alarms&#92;nthat are difficult and time consuming to clear. The Active control brings&#92;nautomated, well-defined control to this process.&#92;n&#92;nThe Active control checks the status of all defined Active policies for the&#92;nresource (`Azure &gt; Network Watcher &gt; Network Watcher &gt; Active &gt; *`), raises an alarm, and takes the defined enforcement&#92;naction. Each Active sub-policy can calculate a status of active, inactive&#92;nor skipped. Generally, if the resource appears to be Active for any reason&#92;nit will be considered Active.&#92;n&#92;n**Note** In contrast with Approved, where if the&#92;nresource appears to be Unapproved for any reason it will be considered&#92;nUnapproved.&#92;n

Determine the action to take when an Azure Network Watcher network watcher is not approved based on `Azure &gt; Network Watcher &gt; Network Watcher &gt; Approved &gt; *` policies.&#92;n&#92;nThe Approved control checks the status of the defined Approved sub-policies for the resource. If the resource is not approved according to any of these policies, this control raises an alarm and takes the defined enforcement action.&#92;n&#92;nFor any enforcement actions that specify `if new`, e.g., `Enforce: Delete unapproved if new`, this control will only take the enforcement actions for resources created within the last 60 minutes.&#92;n&#92;nSee [Approved](https://turbot.com/guardrails/docs/concepts/guardrails/approved) for more information.&#92;n

azure_network_watcher_approved

Determine whether the Azure Network Watcher network watcher is allowed to exist.&#92;nThis policy will be evaluated by the Approved control. If an Azure Network Watcher network watcher is not approved, it will be subject to the action specified in the `Azure &gt; Network Watcher &gt; Network Watcher &gt; Approved` policy.&#92;nSee [Approved](https://turbot.com/guardrails/docs/concepts/guardrails/approved) for more information.&#92;n&#92;n**Note**: The policy value must be a string with a value of `Approved`, `Not approved` or `Skip`, or in the form of YAML objects. The object(s) must contain the key `result` with its value as `Approved` or `Not approved`. A custom title and message can also be added using the keys `title` and `message` respectively.&#92;n

azure_network_watcher_approved_custom

A list of Azure regions in which Azure Network Watcher network watchers are approved for use.&#92;n&#92;nThe expected format is an array of regions names. You may use the &#39;*&#39; and &#39;?&#39; wildcard characters.&#92;n&#92;nThis policy will be evaluated by the Approved control. If an Azure Network Watcher network watcher is created in a region that is not in the approved list, it will be subject to the action specified in the `Azure &gt; Network Watcher &gt; Network Watcher &gt; Approved` policy.&#92;n&#92;nSee [Approved](https://turbot.com/guardrails/docs/concepts/guardrails/approved) for more information.&#92;n

Determine whether the Azure Network Watcher network watcher is allowed to exist.&#92;n&#92;nThis policy will be evaluated by the Approved control. If an Azure Network Watcher network watcher is not approved, it will be subject to the action specified in the `Azure &gt; Network Watcher &gt; Network Watcher &gt; Approved` policy.&#92;n&#92;nSee [Approved](https://turbot.com/guardrails/docs/concepts/guardrails/approved) for more information.&#92;n

Configure whether to record and synchronize details for the Azure Network Watcher network watcher into the CMDB.&#92;n&#92;nThe [CMDB](https://turbot.com/guardrails/docs/concepts/guardrails/cmdb) control is responsible for populating and updating all the attributes for that resource type in the Guardrails CMDB.&#92;nAll policies and controls in Guardrails are based around the resource, so usually the CMDB policy is set to **&quot;Enforce: Enabled&quot;**.&#92;n&#92;nIf set to Skip then all changes to the CMDB are paused - no new resources will be discovered, no updates will be made and deleted resources will not be removed.&#92;n&#92;nTo cleanup resources and stop tracking changes, set this policy to **&quot;Enforce: Disabled&quot;**.&#92;n&#92;nCMDB controls also use the Regions policy associated with the resource. If region is not in `Azure &gt; Network Watcher &gt; Network Watcher &gt; Regions` policy, the CMDB control will delete the resource from the CMDB.&#92;n&#92;n(**Note**: Setting CMDB to **&quot;Skip&quot;** will also pause these changes.)&#92;n

A list of Azure regions in which Azure Network Watcher network watchers are supported for use.&#92;n&#92;nAny network watchers in a region not listed here will not be recorded in CMDB.&#92;n&#92;nThe expected format is an array of regions names. You may use the &#39;*&#39; and&#92;n&#39;?&#39; wildcard characters.&#92;n

A list of Azure regions in which Azure Network Watcher resources are approved for use.&#92;n&#92;nThe expected format is an array of regions names. You may use the &#39;*&#39; and&#92;n&#39;?&#39; wildcard characters.&#92;n&#92;nThis policy is the default value for all Azure Network Watcher resources&#39; Approved &gt; Regions policies.&#92;n

Azure > Network Watcher

Azure > Network Watcher > Approved Regions [Default]

Azure > Network Watcher > Permissions > Levels

Configure whether permissions policies are in effect for Azure Network Watcher&#92;nThis setting does not affect Subscription level permissions (Azure/Admin, Azure/Owner, etc)&#92;n

Azure > Network Watcher > Permissions

Azure > Network Watcher > Permissions > Levels > Modifiers

Define the permissions levels that can be used to grant access to Storage an&#92;nAzure Subscription.  Permissions levels defined will appear in the UI to assign&#92;naccess to Guardrails users.&#92;n

A map of Azure API to Guardrails Permission Level used to customize Guardrails&#39;&#92;nstandard permissions. You can add, remove or redefine the mapping of&#92;nAzure API operations to Guardrails permissions levels here.&#92;n&#92;n```&#92;nexample:&#92;n  - &quot;Microsoft.Network Watcher/Network Watcher/delete&quot;: operator&#92;n  - &quot;Microsoft.Network Watcher/Network Watcher/write&quot;: admin&#92;n  - &quot;Microsoft.Network Watcher/Network Watcher/read&quot;: readonly&#92;n```&#92;n

A list of Azure regions in which Azure Network Watcher resources are supported for use.&#92;n&#92;nThe expected format is an array of regions names. You may use the &#39;*&#39; and&#92;n&#39;?&#39; wildcard characters.&#92;n&#92;nThis policy is the default value for all Azure Network Watcher resources&#39; Regions policies.&#92;n

Azure > Network Watcher > Regions

A template used to generate the keys and values for Azure Network Watcher resources.&#92;n&#92;nBy default, all Network Watcher resource Tags &gt; Template policies will use this value.&#92;n

Azure > Network Watcher > Tags Template [Default]

Determine the action to take when an Azure Network Watcher network watcher tags are not updated based on the `Azure &gt; Network Watcher &gt; Network Watcher &gt; Tags &gt; *` policies.&#92;n&#92;nThe control ensure Azure Network Watcher network watcher tags include tags defined in `Azure &gt; Network Watcher &gt; Network Watcher &gt; Tags &gt; Template`.&#92;n&#92;nTags not defined in Network Watcher Tags Template will not be modified or deleted. Setting a tag value to `undefined` will result in the tag being deleted.&#92;n&#92;nSee [Tags](https://turbot.com/guardrails/docs/concepts/guardrails/tagging) for more information.&#92;n

The template is used to generate the keys and values for Azure Network Watcher network watcher.&#92;n&#92;nTags not defined in Network Watcher Tags Template will not be modified or deleted. Setting a tag value to `undefined` will result in the tag being deleted.&#92;n&#92;nSee [Tags](https://turbot.com/guardrails/docs/concepts/guardrails/tagging) for more information.&#92;n

Azure > Network Watcher > Flow Log > ServiceNow

The Flow Log resource type is a network traffic log that can be used to monitor and diagnose conditions at a granular level in, to, and from a network security group within Azure.&#92;n

Azure > CIS v1 > 6 Networking > 6.04 Ensure that Network Security Group Flow Log retention period is &#39;greater than 90 days&#39; (Scored)

Azure > CIS v2.0 > 05 - Logging and Monitoring > 5.01 - Configuring Diagnostic Settings > 5.01.06 - Ensure that Network Security Group Flow logs are captured and sent to Log Analytics

Azure > CIS v2.0 > 06 - Networking > 6.05 - Ensure that Network Security Group Flow Log retention period is &#39;greater than 90 days&#39;

Azure > CIS v3.0 > 06 - Logging &amp; Monitoring > 06.01 - Configuring Diagnostic Settings > 06.01.05 - Ensure that Network Security Group Flow logs are captured and sent to Log Analytics

Azure > CIS v3.0 > 07 - Networking > 07.05 - Ensure that Network Security Group Flow Log retention period is &#39;greater than 90 days&#39;

Azure > CIS v4.0 > 07 - Management and Governance > 07.01 - Logging and Monitoring > 07.01.01 - Configuring Diagnostic Settings > 07.01.01.05 - Ensure that Network Security Group Flow logs are captured and sent to Log Analytics

Azure > CIS v4.0 > 08 - Networking > 08.05 - Ensure that Network Security Group Flow Log retention period is &#39;greater than 90 days&#39;

Azure > CIS v4.0 > 08 - Networking > 08.08 - Ensure that virtual network flow log retention days is set to greater than or equal to 90

Azure > CIS v5.0 > 6 - Management and Governance Services > 6.01 - Logging and Monitoring > 6.01.01 - Configuring Diagnostic Settings > 6.01.01.05 - Ensure that Network Security Group Flow logs are captured and sent to Log Analytics

Azure > CIS v5.0 > 7 - Networking Services > 7.05 - Ensure that network security group flow log retention days is set to greater than or equal to 90

Azure > CIS v5.0 > 7 - Networking Services > 7.08 - Ensure that virtual network flow log retention days is set to greater than or equal to 90

Azure > Network Watcher > Flow Log > ServiceNow > Configuration Item

Azure > CIS v2.0 > 05 - Logging and Monitoring > 5.01 - Configuring Diagnostic Settings > 5.01.06 - Ensure that Network Security Group flow logs are captured and sent to Log Analytics

Azure > Network Watcher > Flow Log > ServiceNow > Configuration Item > Record

Azure > Network Watcher > Network Watcher > ServiceNow

The Network Watcher resource type is a network performance monitoring, diagnostic, and analytics service. It provides tools to monitor, diagnose, and gain insights into network traffic in Azure.&#92;n

Azure > CIS v2.0 > 06 - Networking > 6.06 - Ensure that Network Watcher is &#39;Enabled&#39;

Azure > CIS v3.0 > 07 - Networking > 07.06 - Ensure that Network Watcher is &#39;Enabled&#39; for Azure Regions that are in use

Azure > CIS v4.0 > 08 - Networking > 08.06 - Ensure that Network Watcher is &#39;Enabled&#39; for Azure Regions that are in use

Azure > CIS v5.0 > 7 - Networking Services > 7.06 - Ensure that Network Watcher is &#39;Enabled&#39; for Azure Regions that are in use

Azure > Network Watcher > Network Watcher > ServiceNow > Configuration Item

Azure > Network Watcher > Network Watcher > ServiceNow > Configuration Item > Record

The Network Watcher Service is a part of Microsoft Azure&#39;s networking services. Each Network Watcher Service is a network performance monitoring and diagnostic service that can be used to create and manage network scenarios, thus improving network performance and security within Azure.&#92;n

Mod: azure-networkwatcher

Recommended Version

Resource Types

Controls

IAM Roles

Policies

Policy Packs