Policy Packs

guardrails-samples

The Guardrails Event Poller are responsible polling GCP Logging at intervals specified and retrieves the latest events for processing.

Enable Event Poller for GCP Projects

main

gcp_turbot_event_poller

Configure the GCP Event Poller.  When set to `Enabled`, the poller will&#92;nrun at the interval specified to retrieve the latest events and forward&#92;nthem to the Guardrails Router.&#92;n&#92;n**Note:** The Event Poller and Guardrails Event Handler are different mechanisms for&#92;nsending information to Guardrails. You should enable one or the other, but not both.&#92;n

eventPoller

GCP > Turbot > Event Poller

gcp_turbot_event_poller_interval

The polling interval.  This policy determines how often&#92;nthe event poller will run.&#92;n

eventPollerInterval

GCP > Turbot > Event Poller > Interval

gcp_turbot_event_poller_interval_window

The polling window, in minutes.  This policies determines the oldest&#92;nevents the event poller will retrieve.  For example, setting the window&#92;nto &#39;5 minutes&#39; will cause the poller to retrieve all events from&#92;nthe previous 5 minutes every time it runs.&#92;n&#92;nThe Window must be greater than the Interval, and it is recommended&#92;nto be at least twice the Interval.  For example, if the Interval&#92;nis &#39;Every 5 Minutes&#39;, the Window should be at least &#39;10 Minutes&#39;.&#92;n

Policy	Setting	Note
GCP > Turbot > Event Poller	Enabled
GCP > Turbot > Event Poller > Interval	Every 1 minute
GCP > Turbot > Event Poller > Window	15 minutes

Policy Settings